View CBR02CXXXX_2940375.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 1 one world one brand one strategy one focus one team one kemet benefts ? - 55c to +125c operating temperature range ? u ltra high q ? ba se metal electrode (bme) dielectric system ? p b-free and rohs compliant ? 0 201, 0402, 0603 and 0805 case sizes (inches) ? d c voltage ratings of 6.3v, 10v, 25v, 50v, 100v and 250v ? ca pacitance offerings ranging from 0.1pf up to 100pf ? a vailable capacitance tolerances of 0.05pf, 0.1pf, 0.25pf, 0.5pf, 1%, 2%, 5% and 10% ? n o piezoelectric noise ? l ow esr ? h igh thermal stability ? n o capacitance change with respect to applied rated dc voltage ? n egligible capacitance change with respect to temperature ? n o capacitance decay with time ? n on-polar device, minimizing installation concerns ? 1 00% pure matte tin-plated termination fnish allowing for excellent solderability overview kemets cbr series surface mount multilayer ceramic capacitors (mlccs) in c0g dielectric feature a robust and exceptionally stable copper electrode dielectric system that offers excellent low loss performance (high q). these devices provide extremely low esr and high self-resonance characteristics, and are well-suited for resonant circuit applications or those where q and stability of capacitance characteristics are required. cbr series capacitors exhibit no change in capacitance with respect to time and voltage and boast a negligible change in capacitance with reference to ambient temperature. capacitance change is limited to 30ppm/oc from -55c to +125c. cbr series devices are suitable for many circuit applications including rf power amplifers, mixers, oscillators, low noise amplifers, flter networks, antenna tuning, timing circuits, delay lines and mri imaging coils. surface mount multilayer ceramic capacitors (smd mlccs) for high power applications cbr series, c0g dielectric, ultra high q, low esr, 6.3vdcC250vdc (rf & microwave) ordering information cbr 02 c 330 f 9 g a c series case size (l"x w") specifcation/ series capacitance code (pf) capacitance tolerance voltage dielectric termination style termination finish packaging/grade (c-spec) 1 cbr 02 = 0201 04 = 0402 06 = 0603 08 = 0805 c = standard 2 sig. digits + number of zeros use 9 for 1.0 - 9.9pf use 8 for 0.5 - .99pf ex. 2.2pf = 229 ex. 0.5pf = 508 a = 0.05pf b = 0.1pf c = 0.25pf d = 0.5pf f = 1% g = 2% j = 5% 9 = 6.3v 8 = 10v 3 = 25v 5 = 50v 1 = 100v a = 250v g = c0g a = n/a c = 100% matte sn blank = 7" reel unmarked 1 when ordering cbr series devices, a "suffx" or "cspec" is not required to indicate a 7" reel packaging option. cbr devices are only available and shipped on 7" reels (paper tape). bulk bag and cassette packaging options are not available. please contact kemet if you have a specifc, non-standard packaging requirement. www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 2 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) dimensions C millimeters (inches) case size (in.) case size (mm) l length w width t thickness b bandwidth mounting technique 0201 0603 0.60 0.03 (0.024 0.001) 0.30 0.03 (0.012 0.001) 0.30 0.03 (0.012 0.001) 0.15 0.05 (0.006 0.002) solder refow only 0402 1005 1.00 0.05 (0.040 0.002) 0.50 0.05 (0.020 0.002) 0.50 0.05 (0.020 0.002) 0.25 + 0.05 / -0.10 (0.010 + 0.002 / -0.004) 0603 1608 1.60 0.10 (0.063 0.004) 0.80 0.10 (0.031 0.004) 0.80 0.07 (0.031 0.003) 0.40 0.15 (0.016 0.006) solder wave or solder refow 0805 2012 2.00 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.85 0.10 (0.031 0.004) 0.50 0.20 (0.020 0.008) applications typical applications include critical timing, tuning, bypass, coupling, feedback, fltering, impedance matching and dc blocking. field applications include wireless and cellular base stations, wireless lan, subscriber-based wireless services, wireless broadcast equipment, satellite communications, rf power amplifer (pa) modules, flters, voltage-controlled oscillators (vcos), pas, matching networks, rf modules, and medical electronics. qualifcation rf and microwave products are subject to internal qualifcation. details regarding test methods and conditions are referenced in table 4, performance & reliability. ceramic surface mount w l t 100% tin or snpb plate nickel plate conductive metalization electrodes www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 3 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) electrical parameters/characteristics item parameters/characteristics operating temperature range: -55c to +125c capacitance change with reference to +25c and 0 vdc applied (tcc) 0 30 ppm/oc (0 60 ppm/oc for 0201 case size product 22pf) aging rate (max % cap loss/decade hour) 0% dielectric withstanding voltage (dwv) see dielectric withstanding voltage table (5 1 seconds and charge/discharge not exceeding 50ma) quality factor (q) 1000 for capacitance values 30pf 400 + 20c for capacitance values < 30pf insulation resistance (ir) limit @ 25c 10g minimum (rated voltage applied for 120 5 secs) capacitance and quality factor (q) measured at 25oc and 30-70% relative humidity under the following conditions: 1 mhz 100khz and 1.0 0.2 vrms if capacitance 1000pf 1 khz 100hz and 1.0 0.2 vrms if capacitance >1000pf note: when measuring capacitance it is important to ensure the set voltage level is held constant. the hp4284 & agilent e4980 have a feature known as automatic level control (alc). the alc feature should be switched to "on." dielectric withstanding voltage table rated voltage (vdc) 100v 250v dwv 250% 200% environmental compliance pb-free and rohs compliant. electrical characteristics srf (ghz) vs. cap (pf) 100 1,000 10,000 100,000 0.1 1 10 100 srf (ghz) cap (pf) 0201 0402 0603 0805 www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 4 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) electrical characteristics con't q vs. frequency 0805 esr vs. frequency 0805 q vs. frequency 0603 esr vs. frequency 0603 q vs. frequency 0402 1 10 100 1,000 10,000 100 1,000 10,000 q freq (mhz) 2.2pf 10pf 33pf 47pf 100pf 0.01 0.1 1 100 1,000 10,000 esr (ohms) freq (mhz) 2.2pf 10pf 33pf 47pf 100pf 0.01 0.1 1 100 1,000 10,000 esr (ohms) freq (mhz) 2.2pf 4.7pf 10pf 20pf 47pf 1 10 100 1,000 10,000 100 1,000 10,000 q freq (mhz) 2.2pf 4.7pf 10pf 20pf 47pf esr vs. frequency 0402 0.01 0.1 1 100 1,000 10,000 esr (ohms) freq (mhz) 1.8pf 4.7pf 10pf 18pf 22pf 1 10 100 1,000 10,000 100 1,000 10,000 q freq (mhz) 1.8pf 4.7pf 10pf 18pf 22pf www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 6 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) table 1 C cbr series, product offering (0201C0805 case sizes) sample style/size 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) size code 02 04 06 08 length (mm) 0.60 0.03 1.00 0.05 1.60 0.10 2.00 0.20) width (mm) 0.30 0.03 0.50 0.05 0.80 0.10 1.25 0.20 thickness (mm) 0.30 0.03 0.50 0.05 0.80 0.07 0.85 0.10 bandwidth (mm) 0.15 0.05 0.25 + 0.05 / -0.10 0.40 0.15 0.50 0.20 voltage code 9 8 3 5 1 5 1 a 5 1 a cap tol rated voltage (vdc) 6.3 10 25 50 100 50 100 250 50 100 250 capacitance available capacitance / capacitance code 0.1 pf 108 108 108 108 108 b 0.2 pf 208 208 208 208 208 a, b 0.3 pf 308 308 308 308 308 308 308 308 308 308 308 0.4 pf 408 408 408 408 408 408 408 408 408 408 408 0.5 pf 508 508 508 508 508 508 508 508 508 508 508 a, b, c 0.6 pf 608 608 608 608 608 608 608 608 608 608 608 0.7 pf 708 708 708 708 708 708 708 708 708 708 708 0.8 pf 808 808 808 808 808 808 808 808 808 808 808 0.9 pf 908 908 908 908 908 908 908 908 908 908 908 1.0 pf 109 109 109 109 109 109 109 109 109 109 109 1.2 pf 129 129 129 129 129 129 129 129 129 129 129 1.5 pf 159 159 159 159 159 159 159 159 159 159 159 1.8 pf 189 189 189 189 189 189 189 189 189 189 189 2.0 pf 209 209 209 209 209 209 209 209 209 209 209 2.2 pf 229 229 229 229 229 229 229 229 229 229 229 2.7 pf 279 279 279 279 279 279 279 279 279 279 279 3.0 pf 309 309 309 309 309 309 309 309 309 309 309 3.3 pf 339 339 339 339 339 339 339 339 339 339 339 3.9 pf 399 399 399 399 399 399 399 399 399 399 399 4.0 pf 409 409 409 409 409 409 409 409 409 409 409 4.7 pf 479 479 479 479 479 479 479 479 479 479 479 5.0 pf 509 509 509 509 509 509 509 509 509 509 509 5.6 pf 569 569 569 569 569 569 569 569 569 569 569 b, c, d 6.0 pf 609 609 609 609 609 609 609 609 609 609 609 6.8 pf 689 689 689 689 689 689 689 689 689 689 689 7.0 pf 709 709 709 709 709 709 709 709 709 709 709 8.0 pf 809 809 809 809 809 809 809 809 809 809 809 8.2 pf 829 829 829 829 829 829 829 829 829 829 829 9.0 pf 909 909 909 909 909 909 909 909 909 909 909 10 pf 100 100 100 100 100 100 100 100 100 100 100 11 pf 110 110 110 110 110 110 110 110 110 110 f, g, j 12 pf 120 120 120 120 120 120 120 120 120 120 13 pf 130 130 130 130 130 130 130 130 130 130 15 pf 150 150 150 150 150 150 150 150 150 150 16 pf 160 160 160 160 160 160 160 160 160 160 18 pf 180 180 180 180 180 180 180 180 180 180 20 pf 200 200 200 200 200 200 200 200 200 22 pf 220 220 220 220 220 220 220 220 220 24 pf 240 240 240 240 240 240 240 240 f, g, j 27 pf 270 270 270 270 270 270 270 270 30 pf 300 300 300 300 300 300 300 300 33 pf 330 330 330 330 330 330 330 330 36 pf 360 360 360 360 360 360 39 pf 390 390 390 390 390 390 43 pf 430 430 430 430 430 430 47 pf 470 470 470 470 470 470 56 pf 560 560 560 68 pf 680 680 680 82 pf 820 820 820 100 pf 101 101 101 rated voltage (vdc) 6.3 10 25 50 100 50 100 250 50 100 250 cap tol voltage code 9 8 3 5 1 5 1 a 5 1 a www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 7 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) table 2 C chip thickness/reeling quantities chip size in. (mm) chip thickness (mm) reel quantity 7" paper 13" paper 0201 (0603) 0.30 0.03 15,000 contact kemet for availability. 0402 (1005) 0.50 0.05 10,000 0603 (1608) 0.80 0.07 4,000 0805 (2012) 0.85 0.10 4,000 table 3 C chip capacitor land pattern design recommendations per ipc-7351 (mm) case size (in.) case size (mm) density level a: maximum (most) land protrusion density level b: median (nominal) land protrusion density level c: minimum (least) land protrusion c y x v1 v2 c y x v1 v2 c y x v1 v2 0201 0603 0.38 0.56 0.52 1.80 1.00 0.33 0.46 0.42 1.50 0.80 0.28 0.36 0.32 1.20 0.60 0402 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.40 0.52 0.52 1.60 0.80 0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. kemet only recommends wave soldering of 0603(1608) and 0805(2012) case sizes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipc-7351). www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 8 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) soldering process recommended soldering technique: ? s older wave or solder refow for 0603 & 0805 case sizes ? 0 201 & 0402 case sizes are limited to solder refow only recommended soldering profle: ? k emet recommends following the guidelines outlined in ipc/jedec j-std-020 recommended solder alloys: alloy composition solidus liquidous in50 50 in, 50 pb 180c 209c in52 52 in, 48 sn 118c 118c sn62 62.5 sn, 36.1 pb, 1.4 ag 179c 179c sn63 63 sn, 37 pb 183c 183c pb-free 95.5 sn, 3.8 ag, 0.7 cu 217c 217c hi-temp 5 sn, 93.5 pb, 1.5 ag 296c 301c sn5 5 sn, 95 pb 308c 312c www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 9 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) table 4 C performance & reliability: test methods & conditions stress test or inspection method requirements terminal strength pressurizing force: 0201 case size: 2n 0402 & 0603 case sizes: 5n 0805 case size: 10n test time: 10 1 sec. no visible damage or separation of termination system. vibration resistance vibration frequency: 10 ~ 55 hz/min. total amplitude: 1.5mm test time: 6 hrs. (two hrs. each in three mutually perpendicular directions.) no visible damage. cap change and q/df: to meet initial spec. solderability solder temperature: 235 5c dipping time: 2 0.5 sec. 95% min. coverage of termination fnish. board flex capacitor is mounted to a subbstrate which is fexed by means of ram at a rate of 1mm per second until the defection becomes 1 mm. (defection is maintained for 5 1 sec.) store at room temperature for 24 2 hrs. before measuring electrical properties. no visible damage. cap change: within 5.0% or 0.5pf, whichever is larger. (capacitance change is monitored during fexure.) resistance to soldering heat solder temperature: 260 5c dipping time: 10 1 sec preheating: 120 to 150c for 1 minute before immerse the capacitor in a eutectic solder. store at room temperature for 24 2 hrs. before measuring electrical properties. no visible damage. cap change: within 2.5% or 0.25pf, whichever is larger. q/df, ir and dielectric strength: to meet initial requirements. 25% max. leaching on each edge. temperature cycling 5 cycles of steps 1 - 4: no visible damage. cap change: within 2.5% or 0.25pf, whichever is larger. q/df, ir and dielectric strength: to meet initial requirements. store at room temperature for 24 2 hrs. before measuring electrical properties. humidity (damp heat) steady state test temperature: 40 2c humidity: 90 ~ 95% rh test time: 500 + 24/ -0hrs. store at room temperature for 24 2 hrs. before measuring electrical properties. no visible damage. cap change: within 5.0% or 0.5pf, whichever is larger. q/df value: cap 30pf, q 350, 10pf cap < 30pf, q 275 + 2.5c cap < 10pf; q 200+10c ir: 1g? humidity (damp heat) load test temperature: 40 2c humidity: 90 ~ 95% rh test time: 500 + 24/-0 hrs. applied voltage: rated voltage store at room temperature for 24 2 hrs. before measuring electrical properties. no visible damage. cap change: within 7.5% or 0.75pf, whichever is larger. q/df value: cap 30pf, q 200, cap < 30pf, q 100+10/3c ir: 500m? high temperature life test temperature: 125 3c applied voltage: 200% of rated voltage. test time: 1000 + 24/-0 hrs. store at room temperature for 24 2 hrs. before measuring electrical properties. no visible damage. cap change: within 3.0% or 0.3pf, whichever is larger. q/df value: cap 30pf, q 350, 10pf cap < 30pf, q 275 + 2.5c cap < 10pf, q 200 + 10c ir: 1g? step temp. (oc) time (min.) 1 min. operating temp. +0/-3 30 3 2 room temp 2 ~ 3 3 max. operating temp. +3/-0 30 3 4 room temp (25oc) 2 ~ 3 www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 10 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) construction note: image is exaggerated in order to clearly identify all components of construction reference item material a termination system finish 100% matte sn b barrier layer ni c base metal cu d inner electrode cu e dielectric material batio 3 storage and handling ceramic chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity , corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperature C reels may soften or warp, and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40c, and maximum storage humidity not exceed 70% relative humidity. in addition, temperature fuctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulfur bearing compounds. for optimized solderability , chip stock should be used promptly , preferably within 1.5 years of receipt. marking cbr series devices are supplied unmarked. www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 11 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) tape & reel packaging information kemet offers rf and microwave multilayer ceramic chip capacitors packaged in 8mm tape on 7" reels. this packaging system is compatible with all tape fed automatic pick and place systems. table 5 C carrier tape conf guration (mm) eia case size tape size (w)* lead space (p 1 )* 0201 - 0402 8 2 0603 - 1210 8 4 *refer to figure 1 & 2 for w and p 1 carrier tape reference locations. *refer to table 6 for tolerance specif cations. 8mm carrier tape 178mm (7.00") anti-static reel punched paper carrier punched cavity anti-static co ve r tape (.10mm (.004") max thickness) kemet ? bar code label sprocket holes www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 12 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) figure 1 C punched (paper) carrier tape dimensions p 2 a 0 p 0 p 1 b 0 w t e f d 0 table 6 C punched (paper) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 e 1 p 0 p 2 r ref. note 2 8 mm 1.55 + 0.05 (0.061 + 0.002) 1.55 0.05 (0.061 0.002) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) variable dimensions millimeters (inches) tape size pitch f p1 t w 8mm half (2mm) 3.5 0.05 (0.138 0.002) 2.0 0.05 (0.079 0.002) 0.42 0.05 (0.017 0.002) 8.0 0.10 (0.315 0.004) 0.60 0.05 (0.024 0.002) 8mm single (4mm) 4.0 0.10 (0.157 0.004) 0.95 0.05 (0.037 0.002) 0.97 0.05 (0.038 0.002) 0.75 0.05 (0.030 0.002) 2. the tape with or without components shall pass around r without damage (see figure 3). packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 30010 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia-556 and eia-624. tape width peel strength 8mm 0.1 newton to 1.0 newton (10gf to 100gf) 12mm & 16mm 0.1 newton to 1.3 newton (10gf to 130gf) www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 13 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) figure 2 C bending radius r b en ding radius p unc hed ca rrier figure 3 C tape leader & trailer dimensions trailer 110 mm minimum, carrier t ape end leader rou nd sp rock et holes t op co ve r t ape top c ove r t ape p unche d carrier 8mm components 20 pitch mini mum 40 0mm ~ 560mm minimum (empty cavities and leader) figure 4 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250mm www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 14 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) figure 5 C reel dimensions n a w 1 c table 7 C reel dimensions metric will govern constant dimensions millimeters (inches) tape size reel size a c 8mm 7 178 0.10 (7.008 0.004) 13.0 0.20 (0.512 0.008) variable dimensions millimeters (inches) tape size n min. see note 2, table 5 w 1 8mm 50 (1.969) 8.4 + 1.5/ -0.0 (0.331 + 0.059/ -0.0) www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 15 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 west chester, pa tel: 610-692-4642 central schaumburg, il tel: 847-882-3590 carmel, in tel: 317-706-6742 west milpitas, ca tel: 408-433-9950 mexico zapopan, jalisco tel: 52-33-3123-2141 europe southern europe geneva, switzerland tel: 41-22-715-0100 paris, france tel: 33-1-4646-1009 sasso marconi, italy tel: 39 - 051-939111 milan, italy tel: 39-02-57518176 rome, italy tel: 39-06-23231718 madrid, spain tel: 34-91-804-4303 central europe landsberg, germany tel: 49-8191-3350800 dortmund, germany tel: 49-2307-3619672 kwidzyn, poland tel: 48-55-279-7025 northern europe bishops stortford, united kingdom tel: 44-1279-757201 weymouth, united kingdom tel: 44-1305-830747 coatbridge, scotland tel: 44-1236-434455 f?rjestaden, sweden tel: 46-485-563934 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 16 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) other kemet resources disclaimer all product specif cations, statements, information and data (collectively, the information) are subject to change without notice. all information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute C and we specif cally disclaim C any warranty concerning suitability for a specif c customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors www.datasheet.co.kr datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c 1030_c0g_cbr ? 10/20/2011 17 surface mount multilayer ceramic capacitors (smd mlccs) for high power applications C cbr series, c0g, low esr, (rf & microwave) www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of CBR02CXXXX

	To Download CBR02CXXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .